2019狠狠的啪中文字幕_激情五月开心日国产_无码人妻1区2区3区_日韩人妻高清精品专区丨

Welcome to the official website of Xingtai Degang Electronics Co., Ltd!
邢臺德港電子有限公司
keywords:
news information INDEX > news information > News Center > 

Time:2018.07.26     News sources: Hebei Chaoda Sealing Products Co., Ltd

1. form of foundation pit:
There are two types of foundation pit for electronic truck scale, one is no foundation pit, the other is shallow foundation pit. The shallow foundation pit is the installation method of the automobile scale in the foundation pit, the surface of the scale platform and the ground, and the car balance without foundation pit is installed on the ground. It can be regularly cleaned, no water is accumulated, and the cost is cheaper. Generally choose the installation method of all electronic truck scale without foundation pit.
2. site selection:
The installation position of truck scale should have a good drainage channel, and will not be flooded with truck scale due to rainstorm or flash flood. For shallow foundation pit, drainage channel should be set up. In addition, the two ends of the truck scale must have a straight length of enough length for the upper and lower scales of the vehicle. The two ends must be at least equal to the length of the scale.
Another factor that affects the installation position of weighing apparatus is the number of cars you weigh every day. If you weigh only about twenty cars per day, a car balance should be enough to make a double - phase road. If you have to check in about 50 cars every day, you need to get ready to stop, a car balance should be enough, and it's best to prepare a by-pass. If you go far more than 100 cars a day, you should consider two car scales at the same time. In use, each weighing instrument can weigh heavy cars or empty cars in two directions and use by-pass.
You should consider: where should the car stop? Do you want to queue up at the time of the pound? What happens to heavy snow, heavy rain or during peak season? And so on, you need to pay attention to it.
3. basis:
The truck scale must be built of concrete foundation. This foundation must be excavated below the local permafrost line. In the construction, the concrete marks should be guaranteed. The embedded parts should be poured to ensure the geometric dimensions of the level, the position degree and so on. In the irrigation of concrete, it is necessary to ensure the non displacement of the embedded parts. After completion of the foundation pouring, it shall be maintained according to the civil code, and the truck can be installed only when the concrete reaches the design strength index. If we want to shorten the curing period, we should take measures such as adding "early strength agent" under the guidance of professional technicians. To prevent thunder, you should set up a grounding pile according to the local conditions and ensure the grounding resistance <4 Europe. From the center position of the scale to the pound room, a pipe should be laid to wear the signal cable.
Please refer to our company's basic plan, basic construction period and basic maintenance period. It will take about 20 days before and after construction.
4. lbs. room:
The pound room should be close to the car scale, in order to place weighing instruments, or computers, printers and other equipment. In addition, to ensure that the officer can also contact the driver, transfer the balance sheet, ensure the car scale, identify the license plate number and check the goods and so on.
5. installation and verification:
In most cases, the units are responsible for installation and commissioning, and the manufacturers assist in installation.
Crane (or forklift truck), Jack (greater than or equal to 5T) 2, level, electric welding machine (need time) and two odd jobs.
After installation and commissioning, the certificate can be officially opened after the certificate is verified and issued.

Please contact us for details. Telephone: 13930926376

  • PREV:
  • NEXT:
≡  contacts:Manager Wang ≡  mobile:13930926376 ≡  Telephone:0319-2158243 ≡  fax:0319-2159641 ≡  address:No. 1 in Rongtai science and Technology Incubation Park, south of Xingda street, Xingtai Economic Development Zone
河北超達密封
版權所有:邢臺德港電子有限公司       網站備案/許可證號:       

冀公網安備 13050902000085號

技術支持:邢臺市網商軟件開發有限公司