2019狠狠的啪中文字幕_激情五月开心日国产_无码人妻1区2区3区_日韩人妻高清精品专区丨

Welcome to the official website of Xingtai Degang Electronics Co., Ltd!
邢臺德港電子有限公司
keywords:
news information INDEX > news information > News Center > Operation and maintenance of electronic truck scale

Operation and maintenance of electronic truck scale

Time:2020.09.21     News sources: Hebei Chaoda Sealing Products Co., Ltd

I. Instructions for use

1. After the installation of the weighing apparatus, it must be verified and qualified by the local metrology department or the metrology department authorized by the state before it can be put into use.

2, before use, should first check whether the scale body is flexible, the performance of each supporting parts is good.

3. After starting the instrument, it can be used only when zero point is stable.

4. When the vehicle enters the weighing platform (or places heavy objects as lightly as possible), the vehicle speed should be less than 5km/h, and then slowly brake and measure after the vehicle stops steadily.

5. Stay in the center of the scale as much as possible.

6. The meter reading must read the correct weight value when the "stability" indicator is on.

Ii. Maintenance

L. In order to ensure the accuracy of system measurement, protect against wind and rain erosion, and facilitate operation, it is required to set up a shed and a measuring and weighing room.

2. There should be a 10-15mm gap at the junction of the weighing platform and the ramp, and no collision or friction should occur.

3. The weight of the measured truck shall not exceed the rated weight value of the system.

4. In order to ensure the normal measurement of the weighing apparatus, it should be regularly verified.

5. No foreign body should be stuck under the scale.

6, the division of the scale operators must pass the training before the operation, repair personnel do not have to master the necessary knowledge, not at will disassemble any parts, so as not to affect the measurement accuracy or cause damage to the system.

7. The operator of the instrument must digest and absorb the instruction of the instrument in detail, grasp the basic principle and be familiar with the instrument maintenance methods before it can be formally operated and used.

8. Before the system is powered on, check whether the power supply and grounding device are reliable, and unplug the instrument power plug and cut off the power supply when it stops work.

≡  contacts:Manager Wang ≡  mobile:13930926376 ≡  Telephone:0319-2158243 ≡  fax:0319-2159641 ≡  address:No. 1 in Rongtai science and Technology Incubation Park, south of Xingda street, Xingtai Economic Development Zone
河北超達密封
版權所有:邢臺德港電子有限公司       網站備案/許可證號:       

冀公網安備 13050902000085號

技術支持:邢臺市網商軟件開發有限公司